Volvo Penta Aquamatic Sterndrive V8‐SX is a totally integrated package, powered by the 8‐cylinder, 5.3‐liter, freshwater‐cooled, direct‐injected gasoline engine with catalyst. Working together with the perfectly matched SX single‐prop drive, this package offers very low emission levels and high acceleration power.
What is Volvo SX drive?
Volvo Penta Aquamatic Sterndrive V6‐SX is a totally integrated package, powered by the 6‐cylinder, 4.3‐liter, freshwater‐cooled, direct‐injected gasoline engine. Working together with the perfectly matched SX single‐prop drive, this package offers high acceleration power.
How much horsepower does a 4.3 Volvo Penta have?
The carbureted 4.3GL develops 190-hp at 4600 rpm, but some folks will want a little more power. For them, Volvo Penta builds a slightly more sophisticated 4.3-liter engine, the GXiE. With multi-port fuel-injection, the 4.3GXiE develops 225-hp at 4800.
Is the Volvo Penta 4.3 reliable?
Over the past quarter-century, millions of these engines have been built for on-road, off-road, land and sea applications (maybe even air, too), and it has proven to be reliable and long-lived.
What is Volvo Penta SX? – Related Questions
Is the 4.3 MPI a good engine?
THE TRADE-A-BOAT VERDICT
Perfect for pottering around waterways. The MerCruiser 4.3L MPI makes good economic sense in infrequently used sportscruisers. The exhaust note is nowhere near as satisfying as a V8 but under load the V6 noise ain’t half bad!
How much fuel does a Volvo Penta use?
Volvo Penta Fuel Consumption
| Fuel Consumption Chart LPH – Model |
HP |
4000 |
| Volvo Penta 5.0 GXi |
270 hp |
52.0 |
| Volvo Penta 5.7 Gi |
300 hp |
66.0 |
| Volvo Penta 5.7 GXi |
320 hp |
67.5 |
| Volvo Penta 8.1 Gi |
375 hp |
68.0 |
How many hours will a 4.3 Mercruiser go?
The average life for raw water cooled engines is 1,000-1,500 hours or less depending on how often they are used and how well they have been maintained. Sitting unused is hard on them, it’s better if they are run and flushed often.
What oil does a Volvo Penta 4.3 take?
CASTROL MAGNATEC 10W-40 best.
What HP is a 4.3 Mercruiser?
Power steering is standard, providing you complete and effortless control.
| HP / kW |
220 / 164 |
| Engine type |
V-6 |
| Displacement (L) |
4.3 |
| Bore and stroke |
4.00 x 3.48 / 101 x 88 mm |
| Compression ratio |
9.4:1 |
How many horsepower is a 5.0 MerCruiser?
The 5.0L MPI MerCruiser sterndrive package typically has about 260-hp.
How many horsepower is a 5.7 L boat motor?
Counter Rotation: 881575
| Displacement |
350 cid (5736 CC) / 5.7L |
| Firing Order |
1 – 8 – 4 – 3 – 6 – 5 – 7 – 2 |
| Bore x Stroke |
4.00″ x 3.48″ (101.60 x 88.39 mm) |
| Ignition |
Not Included |
| Horsepower |
325 hp (161 kW) @ 4000 rpm / 196 hp (146 kW) @ 4000 rpm (CNG) |
How much gas does a 4.3 MerCruiser burn?
Mercruiser Fuel Consumption
| Fuel Consumption Chart LPH – Model |
HP |
3500 |
| MerCruiser 3.0 MPI/TKS |
135 hp |
24.0 |
| MerCruiser 4.3 |
190 hp |
28.5 |
| MerCruiser 4.3 MPI |
220 hp |
31.0 |
| MerCruiser 5.0 |
220 hp |
35.5 |
